Table of Contents

Brake Grease Specifications

The following tables are from the -_Arvin Meritor - Maintenance Manual 4M - ADB Series Air Disk Brakes - Revised 04/05

Table G: Air Disk Brake (1540, 1560, 1760) Grease Specifications

Component Meritor Specification NLGI Grade Grease Description Outside Temperature
Caliper 1 O-616-A 1 Clay Base Down to –40°F (–40°C)
O-645 2 Synthetic Oil, Clay Base Down to –65°F (–54°C)
Slide Pin Retainers O-637 2 1-1/2 Calcium Base Refer to the grease manufacturer’s specifications for the temperature service limits.
O-641 Anti-Seize See Above
Camshaft Splines Any of Above See Above See Above See Above
1 The grease used inside the caliper must be non-melting and also allow correct brake function at cold temperatures listed.
2 Do not mix O-637 calcium-base, corrosion-control grease with other greases.

Table H: Conventional Automatic Slack Adjuster Grease Specifications

Component Meritor Specification NLGI Grade Grease Type Outside Temperature
Automatic Slack Adjuster O-616-A 1 Clay Base Down to –40°F (–40°C)
O-692 1 and 2 Lithium Base Down to –40°F (–40°C)
O-645 2 Synthetic Oil, Clay Base Down to –65°F (–54°C)
Clevis Pins Any of Above See Above See Above See Above
O-637 1-1/2 Calcium Base Refer to the grease manufacturer’s specifications for the temperature service limits.
O-641 Anti-Seize

Operating Temperatures

Down to -40°F (-40°C) Down to -65°F (-54°C)
Clay-Base Greases Synthetic Greases
Meritor Spec O-616-A (Part Number A-1779-W-283)Meritor Spec O-645 (Part Number 2297-X-4574)
Shell Darina Number 1 Mobilgrease 28 (Military)
Texaco Thermatex EP-1 (Discontinued) Mobiltemp SHC 32 (Industrial)
Texaco Hytherm EP-1 (Discontinued) Tribolube-12 Grade 1
Aralub 3837